You attach a quotation, a brochure or a folder of site photos and press send. Then one of three things happens: your mail app refuses the file, the message goes but a “message too large” notice comes back a few minutes later, or nothing seems to happen and the customer says it never arrived. All three usually come back to size. This guide is for an owner or office manager who sends business email from an address on their own domain. It explains why attachments are refused, how to read the bounce, how to make files smaller, when to send a download link instead and how to do that without looking like a phishing email, and what to ask your host. Limits differ between mail services and change over time, so this guide gives no figure for any provider; check yours.
Why an email with an attachment bounces
Four causes account for most failures. They look alike from your side, so the first job is to tell them apart.
| Cause | Who decides | What you usually see | What to do |
|---|---|---|---|
| Message too big for your own mail service | The service that sends your mail | An error before the message leaves, or an immediate bounce | Shrink the files, send fewer, or share a link. |
| Message too big for the recipient’s mail system | The recipient’s service, often a company server with a stricter limit | A bounce a few minutes later, or sometimes silence | Shrink or send a link. If only one recipient fails, the cause is at their end. |
| Recipient’s mailbox full | The recipient | A bounce that mentions a full mailbox or being over quota | You cannot fix it. Reach them another way. For your own mailbox, see our guide to a full business mailbox. |
| Blocked file type | Your service or theirs, as a security rule | A bounce or notice about the attachment type, or the attachment removed without a word | Send a PDF instead, or use a link. Do not rename the file to disguise it. |
Some systems also hold a message back or quarantine it without telling you, so silence is not proof of delivery. For anything that matters, ask the recipient to confirm they have it.
Whose limit decides, and why a file counts for more than it weighs
A message travels from your mail app to your mail service, then across to the recipient’s mail service, then into their mailbox. Each step can set its own size limit, and the message has to pass all of them, so the smallest limit is the one that matters. That is why a file can go to one customer and bounce for another: the difference is at the receiving end, and you cannot see it from your side. Common limits vary from service to service, many large webmail services sit in the low tens of megabytes, and company servers can be lower or higher. Limits also change, and an administrator can change them for an account, so do not guess. Check the provider’s own help page.
Two details catch people out. First, a limit usually applies to the whole message, not to each file: three files of moderate size can add up to more than the limit even though none looks large. The text, signature images and any earlier attachments in a forwarded message count too. Second, email was designed for text. A PDF or photo is converted into a text-safe form for sending, and that makes the message larger, roughly a third larger as a rule of thumb and sometimes a little more. Mail systems generally measure the message in that larger form, so a file that looks comfortably under the limit on your disk can still be over it in transit. Some services state their limit as the file you can attach and others as the whole message, so the help page should say which one it means.
A sensible habit is to leave generous headroom: if you know the limit, aim to keep everything you attach at or below about two thirds of it. If you do not know the recipient’s limit, assume it may be lower than yours and plan to send a link for anything large.

How to read a “message too large” bounce
A bounce is an automatic message from a mail system saying your email was not delivered. It arrives in your inbox from a system address, often with a subject such as “Undelivered Mail Returned to Sender” or “Delivery Status Notification (Failure)”. It looks technical, but three parts are enough:
- The address that failed. One recipient failing while others succeeded points to that recipient’s mail system, not yours. Every recipient failing points to your own limit.
- The status code. Codes starting with 5 generally mean a permanent failure and codes starting with 4 a temporary one. Treat codes as guidance, because services use them a little differently.
- The plain-text reason. This is the line to trust. It is written for humans and says what the system objected to.
| Wording in the bounce | Likely meaning | Next step |
|---|---|---|
| “message too large”, “exceeds the size limit”, “too big” | A size limit at your end or theirs | Shrink or send a link. If only some recipients bounced, it is their limit. |
| “mailbox full”, “over quota” | The recipient’s mailbox has no room | Tell them another way. Do not keep resending. |
| “attachment not allowed”, “blocked”, “policy”, a file type named | A blocked file type or a security rule | Send a PDF or a link instead. |
| “try again later”, “deferred”, “temporarily” | A temporary condition; the system retries for a while | Wait. If it keeps failing, keep the bounce and ask. |
A made-up example of the kind of text you might see: “Your message to [recipient address] could not be delivered. Reason: message size exceeds the limit of this system.” Real wording differs between services, so read yours rather than matching it word for word. Bounces also happen for reasons that have nothing to do with size, such as a wrong address, and this guide reads only the size cases. If you need to ask for help, keep the whole bounce, including the code and the time it arrived.
Shrink the files first
Most business attachments can be made much smaller without anyone noticing, and a smaller file is easier for the recipient to open on a phone. Keep the original untouched and send a reduced copy.
| What you are sending | What to try | Watch out for |
|---|---|---|
| PDF made from a document or spreadsheet | Re-export or save with a smaller-size option, and remove images the reader does not need. | Check the pages still look right. |
| Scanned pages | Scan at a lower resolution, in black and white for plain text, and combine only the pages needed. | Zoom in on a phone to confirm the text is readable. |
| Phone photos | Choose a smaller size when attaching, or resize them first. Crop away what is not needed. | Send originals only if the recipient needs print quality. |
| Artwork and design files | Export a lower-resolution preview for approval. Send the full-resolution file later, by link. | Never send the working file when a preview will do. |
| Video | Trim it and lower the resolution, but expect it to be too large anyway. | A link is usually the better route. |
| Many files | Zip them if they are documents or spreadsheets, which compress well. | Photos, PDFs and video are already compressed, so zip does little. Some systems treat zip files with suspicion. |
A quick checklist before you press send:
- Add up everything. Check the total size of all attachments, not just the biggest file.
- Remove what is not needed. Fewer files are easier to deliver and easier to read.
- Reduce PDFs and photos. Keep the originals.
- Zip only if it helps. It does not for photos or PDFs.
- Leave headroom. Stay well under the limit if you know it, because the message grows in transit.
- Group sensibly. Send the quotation in one email and the photos in another, rather than one email that is borderline.
- Switch to a link if it is still big or you do not know the recipient’s limit.
- Ask for confirmation on anything that matters.
Do not split one large file into several parts across many emails. The recipient has to put the parts back together, each part can bounce or be filtered, and a burst of similar emails can look like spam. Sending different files in separate emails is a different thing and is fine.
When shrinking is not enough: send a link
A share link works differently. You keep the file in online storage or on a file-transfer service, and the email carries only a link the recipient uses to download it. The email stays tiny, and the file size no longer depends on the recipient’s mail limit. What matters is the service you choose and how you set the link. This guide does not recommend a product. Here is what to look for:
- An expiry date. The link stops working after a set time, so an old email does not leave your file open forever.
- An optional password. For anything sensitive, set one and send it by a different channel, such as a WhatsApp message.
- No account needed for the recipient. A customer who has to register to download a quotation may simply give up.
- Control over who can open it. A link only named people can open is safer than one that works for anyone who has it. Prefer the narrower setting for business documents.
- A reputable provider you chose yourself. Read its privacy terms, especially for contracts or personal documents.
- The ability to delete. Remove the file or switch the link off once delivery is confirmed, and keep your own copy.
- A clear file name and size. The customer should know what to expect before clicking.
One thing not to do: leave a big file in a public folder on your own website and email the address. Anyone who finds the address can open it, and it is not private.
The trust angle: how not to look like a phishing email
Customers have been told not to click unexpected links, and they are right. A fake “view document” link that leads to a copy of a sign-in page is a common trick. An honest download link from you can look the same as that to a cautious customer, so make it easy for them to trust it:
- Tell them a link is coming. Send a short message first, by WhatsApp or a separate email: “I will email you the quotation as a download link from my business address in a few minutes.”
- Send from your own domain address. A message from your business address looks more credible than one from a personal free account with a different name. Our guide to business email on your own domain explains why it also helps the email reach the inbox.
- Be specific. Name the file, the project and who you are, so the message could not be mistaken for a mass mailing.
- Keep the link plain. It should go straight to the file. It should not ask for the customer’s email password, a sign-in to an unfamiliar page, payment details, or a deadline of minutes.
- Protect sensitive files. For IC copies, bank details or contracts, set a password and send it separately.
If you are the one receiving an unexpected link, do not click. Confirm with the sender using a phone number or WhatsApp contact you already have, not one in the email. Our guide to fake domain renewal scam emails shows what these fakes look like and how to verify independently.
A made-up example: quotation, artwork and site photos
This example is made up, with an invented business and invented sizes, to show the steps. Contoh Signage is a small sign maker. The owner emails one customer a quotation, a full-resolution artwork proof and fourteen phone photos of the site. Everything is attached in a single email, about 90 MB in total, and it bounces with a “message too large” notice. The customer’s company server turns out to allow about 15 MB per message.
| Item | As made (illustrative) | What the owner did |
|---|---|---|
| Quotation (PDF) | Under 1 MB | Attached as it was. |
| Artwork proof | About 30 MB at full resolution | Exported a lower-resolution review PDF of about 3 MB for the email. Kept the full file for later. |
| Fourteen site photos | About 60 MB | Resized them to a smaller size, about 4 MB in all. |
| Print-ready artwork and full-size photos | About 90 MB | Sent later as a download link with an expiry date, after a WhatsApp heads-up. |
The first email now carries about 8 MB, comfortably under the customer’s limit even after the message grows in transit. The customer approves the layout from the review copy. The owner then messages, “I am sending the print-ready files as a link that expires on Friday,” and sends the link from the business address. The customer downloads the files, confirms by WhatsApp, and the owner switches the link off.
What to ask your host or mail provider
You cannot see most of these limits from outside, and they differ between providers, so the reliable way is to ask in writing and keep the answer. This guide does not know the answers for any particular provider:
- What is the largest message my mailbox can send, and the largest it can receive?
- Is that limit counted on the files or on the whole message after it has been converted for sending?
- Is there a separate size limit for each mailbox, and how do I see how full mine is?
- Which file types are blocked on outgoing and incoming mail, and does the sender get a notice?
- Is there a limit on how many messages or recipients I can send to per hour?
- Can any of these limits be changed on my account?
- If an email to a customer bounces, will you look at it if I send the full bounce text and the time?
A template line and a checklist for sending a download link
Adapt the wording and replace every bracket. The names are made up.
Subject: [Project name]: quotation and artwork files, download link
Hi [Customer name], as mentioned on WhatsApp, here is the download link for the print-ready artwork and site photos: [link]. It opens without signing in and expires on [date]. [If password-protected: I will send the password in a separate message.]
The quotation and a review copy of the artwork are attached. Please confirm once you have downloaded the files, or tell me if you would like them sent another way.
Regards,
Aisyah Rahman, Contoh Signage, [office phone]
| If you send big files once in a while | If you send them regularly |
|---|---|
| Shrink first and attach if it fits well under the limit. | Agree a house rule for when something is attached and when a link is used. |
| Send a heads-up before any link. | Save the link email and the heads-up as ready-made text. |
| Set an expiry date and a password for sensitive files. | Use the same share settings every time, so customers learn what yours look like. |
| Delete the file once it is delivered. | Name files consistently and clear out expired shares every month or so. |
Common mistakes
- Judging by the biggest file. It is the total message that counts, and it grows in transit.
- Assuming the recipient’s limit matches yours. Company servers can be stricter than yours.
- Resending the same big email. If it bounced for size, it will bounce again.
- Renaming a blocked file to get it through. Filters look inside, and it looks like what a scammer would do.
- Splitting one large file across many emails. It annoys the recipient and can look like spam.
- An open link for a sensitive document. Use a password, an expiry date and a narrow setting.
- An unannounced link. Customers are right to be suspicious of it.
- Leaving shared files up forever. Delete or switch off the link once the file has been delivered.
- Treating silence as delivered. Ask for a short confirmation on anything important.
Where Gotka Technologies fits
Gotka runs cPanel hosting, and email accounts come with the plans: Go AI Lite includes 30 email accounts and Go AI Plus includes unlimited email. Gotka also offers domain registration from RM10/yr, so your email address can match your own domain. If you set up mail on a phone or laptop, our guide to business email on your phone and laptop covers the settings. Bulk mailings are a different matter from big attachments; see sending a newsletter from a hosting mailbox.
This guide does not state a Gotka message size, attachment size, mailbox size or sending limit, and it does not recommend a file-sharing tool, because none of that is published in the material it can cite. For help with your own account, send a ticket through the client-area ticket system, or call or WhatsApp +60 11-6331 6630, Monday to Friday, 9am to 6pm (MYT).
Key terms used in this guide
- Attachment: a file sent along with an email message.
- Message size: the size of the whole email, including text, signature and attachments, once prepared for sending.
- Size limit: the largest message a mail system will accept; each service sets its own.
- Encoding: converting a file into a text-safe form for email, which makes it larger.
- Bounce: an automatic message saying an email was not delivered.
- Status code: a short code in a bounce; 5 generally means permanent and 4 temporary.
- Mailbox quota: the amount of mail a single mailbox may hold.
- Share link: a web address the recipient uses to download a file kept online.
- Expiry date: the time after which a share link stops working.
- Zip: a format that bundles files together and may make them smaller.
- Phishing: a fake message designed to trick someone into clicking a link or giving up a password.
Why does my email say the attachment is too large?
Because the whole message, files plus text, is bigger than a limit set by your mail service or the recipient’s, and the smaller limit applies. Sending also makes files larger in transit, so a file that looks under the limit can still be refused. Shrink the files, send fewer per email, or share a download link instead.
Why did my email bounce when the file was under the limit?
The limit usually counts the whole message after the files are converted for sending, which makes it larger than the file on your disk. Several files add up, and the recipient’s mail system may set a lower limit than yours. Stay well under the stated figure, and confirm the recipient’s limit if the email matters.
How do I read a “message too large” bounce?
Read three things: the address that failed, the status code, and the plain-text reason. Wording such as “message too large” or “exceeds the size limit” points to size. If only one recipient bounced, the cause is probably at their end. Codes are guidance and the plain-text reason matters more, so keep the whole bounce.
How do I make a PDF or photos smaller before emailing?
Re-export the PDF with a smaller-size option, drop images you do not need, and send a review copy instead of print-ready artwork. Resize phone photos to a smaller size before attaching. Zip helps documents but does little for photos and PDFs. Keep the originals, and check the result is still readable on a phone.
Is it safe to send a download link instead of attaching a file?
It can be, if you choose a reputable provider and set an expiry date, an optional password, and who may open the link. Tell the customer a link is coming and send it from your business address. Customers should distrust unexpected links, so avoid anything that asks them to sign in or pay.
Can I split a big file across several emails?
It is a poor fix. The recipient has to put the parts back together, each part can bounce or be filtered, and a burst of similar emails can look like spam. Sending different files in separate emails is fine. For one large file, a download link with an expiry date is the cleaner route.
What is Gotka’s maximum attachment size?
This guide does not state a Gotka message size, attachment size, mailbox size or sending limit, because none is published in the material it can cite. Ask support in writing through the client-area ticket system, or call or WhatsApp +60 11-6331 6630, Monday to Friday, 9am to 6pm (MYT).
Out of the Office Without Missing Customers: An Automatic Reply and a Professional Signature for Your Business Email
How to set an out-of-office auto-reply and a professional signature for business email: who should and should not get it, what to write, templates and a test.
HostingCan You Send a Newsletter From Your Hosting Email? Why Bulk Mail From a Mailbox Gets Blocked
Can you send a newsletter from your hosting email? Why bulk mail from a mailbox gets limited or blocked, and what to use instead for campaigns to your list.
Website Backups: What to Back Up, How Often, and How to Test a Restore
A backup you have never restored is not a backup. What to back up, how often, where to keep it, and how to test a restore before you actually need one.


